to select your account.Use the fields in this tab to control timesheet entry or import functionality.
Select this check box to allow the processing of Union Payroll and enable access to the applicable Union tables. It also enables the Manage Union Profile Setup screen, where you establish the union, local, and crew chief information.
Select this check box to access the Crew Assignment, Manage Fringe Codes, and Manage Fringe Modify Codes.
If you select this check box, you cannot use the Manage Wage Determination Fringe Charge Codes and the Manage Wage Determination Rates screens.
If this check box is selected, the Require Labor Location check box is automatically selected and the Union Fringe Ceilings by Local option becomes enabled.
Select this check box to apply union fringe pay period and contract ceilings at the local level, rather than at the local/union/GLC level. If you select this check box, you have access to the Manage Union Fringe Ceilings by Local screen. In addition, the Compute Payroll process applies the ceilings set up on the Manage Union Fringe Ceilings by Local screen, rather than the ceilings from the Fringe Table subtask of the Manage Union Profile Setup screen. If this check box is selected and no ceilings are assigned to a local/fringe code on the Manage Union Fringe Ceilings by Local screen, no ceilings are applied to that local/fringe code. However, when you compute payroll, Costpoint prints a warning report, listing which local/fringe code combinations were not set up on the Manage Union Fringe Ceilings by Local screen.
Select this check box to enable the processing and setup of screens for wage determination project fringe and wage-related amounts. Selecting this check box (along with the Require Labor Location check box) enables the Manage Wage Determination Fringe Charge Codes screen, where you establish the charge settings for handling WD project fringe amounts. It also enables the Manage Wage Determination Rates screen, where you establish base pay rates per hour and an associated handling method, Fringe Amounts per Hour, and a related Fringe Payment Method. Fringe codes are established on the Manage Fringe Codes screen. The Fringe Payment Method enables the automatic generation of a "Fringe" timesheet line, when the timesheet line being charged results in "Fringe" fields being found in the Wage Determination Rates table, and the Wage Determination Rates record has the Fringe Payment Method set to Cash.
Select this check box to turn on the feature for calculating "running" control totals for regular hours, other (overtime) hours and total hours, and by timesheet type (regular, other than regular, and total number of timesheets) for a Group (or batch) of timesheets being entered on the Manage Timesheets screen. Select this check box to enable user entry of control totals for the batch before beginning timesheet entry. These control totals are compared to the system-calculated totals and you are alerted to any differences when you exit the timesheet entry screens.
Select this check box to use standard (or effective) hourly rates for calculating labor costs for salaried employees. To use this feature, enter, on the Manage Employee Information screen, the estimated hours to be worked per year by employees. Costpoint calculates the standard (or effective) hourly rate (annual salary divided by the number of estimated hours) and uses this figure to calculate labor cost on the timesheet line.
Use this field to generate a separate timesheet line that shows the difference between total labor cost at the standard rate and the employee's salary amount if the Standard Variance button is clicked on the Manage Timesheets screen during timesheet entry. This field is available and required only if you selected the Enable check box. Enter a General Ledger account or click to select your account.
Select this check box to use the reference date to determine the rate when entering Correcting or Labor Only timesheets.
Select this check box to allow changes to the General Labor Category (GLC) on each timesheet line. If you do not select this check box, the GLC is still stored on each timesheet line, but is filled in from the Default tab of the Manage Employee Information screen. This check box is selected as the default when you first enter this screen.
Select this check box to allow edit of the workers' compensation code (the WC field) on the timesheet line.
Select this check box to require that a labor location be entered for each timesheet line. In order to access the Manage Wage Determination Rates and Manage Wage Determination Fringe Charge Codes screens, you must select both the Enable Wage Determination Feature and Require Labor Location check boxes.
Select this check box to enable the Manage Pay Type Restrictions screen, where you establish the pay types that cannot be used for a given project, but can optionally be used for a given location and labor group/union. It also enables the related automatic editing of the timesheet line pay type being charged based upon the entries on the Manage Pay Type Restrictions screen.
Enter, or click to select, the general ledger account number to be used for recording accrued salaries. Costpoint uses this account when posting to the General Ledger. The posting is generated at the Balance Sheet Level designated in the Top Level Org table for each employee's home organization. The description of the account displays in the field to the right.
From the drop-down list, select the method that will be used to default the effective bill date when you enter or import timesheets. Valid options are:
Subperiod End Date — Select this option to have the last day of the timesheet's subperiod default as the effective bill date when you enter or import timesheets.
Timesheet Date — Select this option to have the timesheet date default as the effective bill date when you enter or import timesheets.
The default value for this drop-down list is Subperiod End Date.
Select this check box to have the reference date default as the effective bill date when you enter a C (Correcting) or D (Replacement) timesheet or import a C (Correcting), D (Replacement), or N (Reversal) timesheet.
Use this group box to select the type of message (error or warning) that displays if you save a labor-only timesheet where the net hours are not equal to zero.
Select this option if you want Costpoint to display a warning message when a labor-only timesheet is entered or imported with net hours not equal to zero. This option is the default.
Select this option if you want Costpoint to display an error message when a labor-only timesheet is entered or imported with net hours not equal to zero.
Starting with Costpoint 7, the prorating of salaries is now done through Labor, rather than Payroll. Use this group box to select your calculation method for proration.
Use these options to select the method to prorate salaried employees.
Select this option to prorate based on work days per cycle. If you select this option, you must establish a work schedule in Costpoint or in Deltek Time & Expense.
Select this option if you do not want to prorate. This option is the default.
Select this check box to prorate only employees who have been hired or terminated within the timesheet cycle. If you do not select this check box, Costpoint prorates any salaried employee who does not work the full amount of scheduled days in the timesheet cycle. If you select None as your Calculation Method, this field is cleared and disabled and no prorating occurs for any employees.
From the drop-down list, select the organization that defaults onto an M (manufacturing order) type timesheet line during timesheet entry or import. Valid options are:
Employee Home Org — Select this option to have the employee's home organization default when you enter or import an M type timesheet line.
MO Org — Select this option to have the manufacturing order's organization default when you enter or import an M type timesheet line. If the timesheet line account is the manufacturing order's WIP labor account, the manufacturing order's WIP labor organization defaults onto the timesheet line. If the timesheet line account is the manufacturing order's WIP misc 1 account, the manufacturing order's WIP misc 1 organization defaults onto the timesheet line. If the timesheet line account is the manufacturing order's WIP misc 2 account, the manufacturing order's WIP misc 2 organization defaults onto the timesheet line.
The default value for this drop-down list is Employee Home Org.
From the drop-down list, select the account validation method for MO timesheet line entry/import. Valid options are:
MO's Build Inventory
Valid PAG Accounts
From the drop-down list, select the method to be used for defaulting the account on manufacturing order timesheet lines. Valid options are:
MO Direct Labor Account — The WIP labor account defaults from the inventory abbreviation that is assigned to the manufacturing order.
Labor Module Defaulting — The application goes through the following levels of default until an account is identified:
Employee Project TS Defaults
Employee Project-Acct-Grp TS Defaults
Labor-Grp Project-Acct-Grp TS Defaults
Projct TS Defaults
Basic Employee Info Defaults
Labor Operation Account — The account assigned to the timesheet line labor operation will default.
From the drop-down list, select the method for determining the date of correcting timesheets. Valid options are:
Date of correction
Original timesheet date
Last day of current open pay period
Last day of next pay period
Last day of next timesheet period
Not applicable